Why You Need a Professional Furnace Tune Up

Posted by on Jan 6, 2017 in Uncategorized | Comments Off on Why You Need a Professional Furnace Tune Up

Furnace failure in the dead of winter can leave your family in desperate need of alternative heating and cost you a fortune in furnace repairs. To prevent this vital appliance from giving up when you need it the most, you need to have it maintained well before the heating season. Here is a look at why a professional furnace inspection and tune-up is very important. Safety   Running a gas furnace comes with the risk of a carbon monoxide leak, a colorless, odorless, and deadly gas that is produced from burning fossil fuels. A furnace inspection often includes a thorough look at how much carbon monoxide your furnace is producing.  Over time, the heat exchanger on your appliance can crack and leak this poisonous gas to the rest of your home. Heating contractors can use infrared cameras and ultraviolet dye to check the integrity of the heat exchanger. Any fissures or other breaches to the integrity of the metal can then be detected and sealed so as to keep toxic fumes out of your home. It is also wise to have a carbon dioxide detector installed near the furnace and in your living room. A professional furnace tune-up can also boost safety by checking for any leaks on your gas line that could lead to air pollution. The gas pressure in the line may also be inspected and regulated, as too much pressure could cause the appliance to over fire and use more fuel than it needs. If you have an electrical furnace, the pros will likely inspect and repair any loose/corroded wiring and cover exposed metal alongside insulated wires so as to reduce the risk of electrocution or a short circuit. Performance An annual furnace tune-up may improve the performance of your appliance in a number of ways. For starters, your heating contractors can remove dust and soot off the gas tube and gas pressure regulator so as to allow for the flow of sufficient fuel to fire the unit. This can cut fuel inefficiencies significantly and result in better heating. The air filters in your supply registers may also need to be cleaned so as to boost air flow and prevent the furnace from working too hard to keep your home warm. Regular furnace maintenance can prevent unexpected breakdowns, lower your heating bills and help ensure your appliance affords you more years of comfort. Talk to a HVAC company near you for more...

read more

3 Tips For Preparing For A DIY Removal Of Mold From Your Crawl Space

Posted by on Dec 14, 2016 in Uncategorized | Comments Off on 3 Tips For Preparing For A DIY Removal Of Mold From Your Crawl Space

While mold anywhere in your home is never a good thing, its presence in your crawl space can be even more problematic. That is often due to the lack of insulation commonly found in crawl spaces and the exposure of the area to warmth, moisture and heat…all of which present as an ideal environment for mold. As a result, you need to be aware of the following advice for perparing for the mold removal.  #1-Remember That Mold Has The Very Real Potential To Make You Sick It is important to remember that mold spores are tiny and can linger in the air or adhere to welcoming surfaces. Unfortunately, when spores are present in a crawl space with limited ventilation, there is a good chance that you could accidentally inhale one or more of those spores. Inhaled mold spores can result in serious lung infections, breathing problems and other health challenges. That means that it is very important to provide as much ventilation as you can to your crawl space and to wear appropriate protective clothing for the duration of your mold removal, as explained below. #2-Protect Yourself And The Area In order to combat the issue of adequate ventilation within the crawl space, it is often helpful to use fans of different sizes to force the spores outward. While you can do so immediately prior to starting the work, it is frequently recommended to get any of the stagnant, contaminated air moving a few hours prior to going in the area. You will also need to wear an intact haz-mat suit with an attached hat, booties and gloves. Every inch of your body needs to be fully covered and an appropriate breathing mask is a crucial aspect of the uniform. If a rip, tear or other type of damage occurs to your clothing while you are in the crawl space, you should evacuate the area as soon as possible and then not return until safely ensconced in another suit. #3-Provide Adequate Lighting To The Crawl Space and Allow The Mold Spores A Safe Place To Land Given that you obviously want the mold to detach from the walls and internal components inside the crawl space, placing a large and sturdy piece of plastic over the ground is likely to make your job much easier. Since even a small amount of mold in the area could allow the problem to quickly occur again, you should also plan to provide as much lighting as you can. Flashlights, floodlights and any other portable source of light can help to illuminate the corners of the affected space. In conclusion, when mold has developed in the crawl space of your home, it is crucial to remove it entirely as soon as possible. Therefore, it is a good idea to consider the information provided above and contact a mold remediation contractor....

read more

Why Is Your Added Bonus Room Warmer Than The Rest Of Your Home?

Posted by on Oct 18, 2016 in Uncategorized | Comments Off on Why Is Your Added Bonus Room Warmer Than The Rest Of Your Home?

An added room is supposed to feel like a real estate victory. Unfortunately, if the room is unbearably hot when other rooms are being cooled properly by your home’s cooling system, the room can feel like a loss. If your bonus room is not cooling in the same manner as other rooms, here are some reasons why.  The Room Is on the Second Floor Even though the heat in your home might seem like it is sitting in the air, it is actually rising. As the heat rises, it tends to settle in the upper parts of your home. If your bonus room is on the second floor, it is basically trapped between the insulated attic and the first floor.   At the same time, your cooling system is forced to work harder to cool the second floor, which now has an additional room. Depending on how well the ductwork was completed for the bonus room, it could be left getting far less air than the other rooms in your home.   To correct this issue, your ductwork might need to be redesigned. Your HVAC technician might also recommend that the air conditioner unit is upgraded.   The Ceiling Is Vaulted With Recessed Lighting A vaulted ceiling with recessed lighting is a popular feature with homeowners, but in your bonus room, it can present a cooling nightmare. If you opt for recessed can lights, the insulation has to be moved to make way for the casing. Unfortunately, when this happens, your room loses some of the insulation that is needed to maximize the coolness from the cooling system.   In addition to this, the lights can even make the room seem hotter when they are on. As the temperature in the room increases, you might find yourself turning the thermostat to a lower temperature. The result is a higher energy bill and freezing the other rooms.   One way to deal with the issue is to focus on improving the insulation in the room. One way to do this is to focus on beefing up the insulation inside the attic. You should also consider replacing your canned lights with air tight insulated lights. You can still have the canned lights, but limit the flow of air through the ceiling.   Your HVAC technician can help you pinpoint other reasons that could be causing your bonus room to be hotter than expected. Resolving the problem is important to saving on your energy costs and being comfortable while being in the room.  For more information or advice, contact a business such as A Bailey...

read more

Prepping An Apartment After A Long-Term Tenant Moved Out? 3 Ways To Improve Air Quality

Posted by on Aug 12, 2016 in Uncategorized | Comments Off on Prepping An Apartment After A Long-Term Tenant Moved Out? 3 Ways To Improve Air Quality

Taking care of a rental apartment can mean running into frustrations with getting it ready between tenants. In order for the apartment to get occupied quickly after a tenant has moved out, you need to look into what you can do to get the apartment in shape. When a long-term tenant has moved out, there are a number of things that you’ll need to do as basic maintenance and also to get the place in the best shape possible for open houses with potential tenants. If you’re curious about ways to improve the air quality in the apartment, consider the following tips and what can be done to make the apartment ready to be occupied. Get the Air Ducts Cleaned The most obvious way to get the apartment cleaned up for potential tenants is through the help of a HVAC cleaning business. With their help, you can get the air ducts throughout the apartment cleaned. What this will do is get rid of a lot of the allergens that can be in the air, making it easier for you to breathe and your future tenants to be comfortable. This can be especially important if anybody that rents the apartment typically suffers from allergies. When getting air duct cleaning, you can also have the filters cleaned or replaced if necessary. Deep Clean the Floors After HVAC Cleaning After getting air duct cleaning in the apartment, you’ll need to arrange to get the floors cleaned as well. While you can get the floors cleaned first, this can often lead to the flooring being dirty due to it holding on to dirt and dust allergens in the carpet. If you’re concerned with this being an issue, it’s best to schedule the floor cleaning to be taken care of after HVAC cleaning has concluded. Give the Window Tracks a Good Cleaning While your tenants will likely rely on the heating and cooling system to regulate the temperature in the apartment most of the time, they may crack open the windows from time to time. With this in mind, you’ll want to get the window tracks cleaned as well. Looking into the various ways to clean an apartment and improve the air quality can make a big difference in the comfort of your tenants. By getting all this cleaning done ahead of time of showing the property, you can have a much better chance of finding tenants and having them be pleased with the condition that the apartment is in. For more information, talk to a professional like Tailor Made Maintenance...

read more

3 Ways To Help Lower Your Cooling Bills

Posted by on Jul 20, 2016 in Uncategorized | Comments Off on 3 Ways To Help Lower Your Cooling Bills

When summer gets hot, your air conditioner is going to start working really hard. That means that your cooling bills are going to go up. There are things that you can do to help keep your cooling bills down while still keeping your house cool.  Invest in Heavy Curtains One thing you can do is spend the money on high-quality heavy, dark curtains for all your windows. You can just buy curtains for the windows that get the most amount of sun, but if you get heavy curtains for all the windows, it will work better. The heavy, dark curtains keep the sunlight from pouring into your house. Blocking off as much sunlight as possible will keep your house cooler because you won’t get that radiational heating.  Move Your Window Air Conditioner If you only have window air conditioners, it can be hard for the ACs to combat the outside air. If it’s possible, you may want to move the air conditioner to a window on the side of the house that is in shade or receives the least amount of sun. The reason for this is that the air will be slightly cooler on that side of your house or apartment, so the air conditioner won’t have to work as hard to change the temperature of the air when it goes into your house.  Get Some Fans Fans don’t actually change the temperature. What they do is move the air around, and moving air makes you feel cooler. That’s because it will help to evaporate the sweat on your body, which is what cools you off. You can get box or stand fans that you can station around the house so that it moves the cool air around. You can put one of the fans near air conditioning vents to help boost the air from the vent so that it will go out further. Another option is to get ceiling fans. They will help move the air efficiently, without taking up valuable floor space. They can also help to make sure that the warm air rises up to the ceiling so that it’s not down where you are trying to stay cool. Being hot and then getting the high cooling bills aren’t fun things. But, there are things that you can do that will help to keep your house cool and keep your cooling bills down to a more affordable level. To learn more, visit a website...

read more

4 Signs Of HVAC System Disrepair

Posted by on Apr 13, 2016 in Uncategorized | Comments Off on 4 Signs Of HVAC System Disrepair

The HVAC system in your home is responsible for ensuring that the climate within the interior living space remains comfortable. However, once the system is in need of repair or replacement, you may find that your home suddenly becomes uninviting. Still, before the actual breakdown of a system, your unit will likely develop signs of disrepair. Here are a few of them: Unusual Sounds If your HVAC system starts to make unusual sounds, such as clanking and banging noises, your system may be about to fail. These types of noises are often associated with loosened components of a unit. In some instances, a system part may become completely dislodged. Sometimes, loosening occurs due to the vibrations produced by the unit as it is operating. However, once a component is completely out of place, your system may not function as it should. Since each component of your system may affect other system parts, it is best to have the unit inspected by an HVAC specialist, like Getzschman Heating, LLC, as soon as you notice unusual noises. Uneven Cooling or Heating If the size of your unit is sufficient for the square footage of your living space, the rooms of your home should all be well climatized. If you notice that one area of your home is much cooler or warmer than other areas, your system should be checked. Sometimes, inconsistent cooling or heating is due to a duct problem. Ducts can become dirty over time, and the debris can block the free flow of air into a room. In addition, a damaged duct may allow air to escape before it enters your home. How can you help your ducts stay clean? Make sure you change your air filters about every 3 to 6 months — depending on your manufacturer’s instructions — and more often if you have pets or a large family. Thermostat Problems If you set your thermostat to a specific temperature and the system of your home does not seem to respond properly, there could be a problem. Sometimes, a thermostat develops mechanical issues. For instance, if there is faulty wiring involved, the signal from your thermostat may not be properly relayed to your system. In addition, issues with the compressor of your unit can cause the system not to respond. No Cool Air If your air conditioning system is blowing air into your home but the air does not seem to have been cooled, your system may require the addition of more refrigerant. However, the refrigerant in your unit should actually last your system’s lifetime. And since refrigerant can be expensive (hundreds of dollars), you should make sure that you check for leaks first before adding any more. To have your HVAC system inspected, consult with an HVAC specialist in your...

read more

Go Green And Save Green: Meet Your Lodging Facility’s Heat And Power Needs With A New Cogeneration System

Posted by on Feb 11, 2016 in Uncategorized | Comments Off on Go Green And Save Green: Meet Your Lodging Facility’s Heat And Power Needs With A New Cogeneration System

Lodging businesses in colder climates depend on toasty indoor air to retain guests. When your hotel’s heating units age to the point that they frequently need servicing or repair, it’s time to consider having a new heating system installed. One option is a combined heat and power system that can do extra duty in your hotel by providing electricity, heat and hot water. It’s possible to have a combined heat and power system that is 90% efficient compared to conventional systems. Here are a few facts about these money-saving heating and power arrangements: Combined heat and power-generating systems Also called cogeneration or CHP systems, these systems are innovative energy configurations providing heat, hot water and electricity to both large and small commercial properties. Huge turbine and boiler systems are normally installed in factories and other industrial facilities, but there are smaller CHP systems for more modest applications like a bed and breakfast or one-story motor inn. A hotel or motel can save energy and produce hot water for its restaurants, bathrooms and laundry applications with a small boiler system or a reciprocating engine cogeneration system. The reciprocating engine system uses the waste heat it produces to heat water, while a boiler system generates power via steam and can be used with a radiant heat system to warm conference rooms, retail spaces and other common areas. Other types of systems include gas-combustion turbines, micro-turbines and fuel-cell CHP configurations. Some installations will involve additional infrastructure, but the investment in new venting, radiant equipment and other improvements will be offset by lower energy bills and more reliable power, heat and hot water. Benefits of CHP systems Compared to conventional heating and power systems, CHP cogeneration systems can reduce your hotel’s carbon emissions by 29%. The waste heat that was once vented to the outdoors is now reclaimed to heat your facility’s water and buildings, lowering your overall energy costs. These features of CHP systems allow you to claim the status of a green, sustainable hotel that cares about the environment and sensible energy consumption. A gas- or propane-powered cogeneration system will also keep churning out the watts and the BTUs even if the power grid goes down due to storms or other interference. Your guests and staff are assured they’ll have cozy heat and on-demand hot water no matter what the weather is doing. Have a discussion with your HVAC professionals today to discover the cogeneration possibilities for your lodging...

read more

Investing In A New HVAC Unit? 3 Reasons To Invest In A Split System

Posted by on Jan 7, 2016 in Uncategorized | Comments Off on Investing In A New HVAC Unit? 3 Reasons To Invest In A Split System

If you are shopping for a heating and air conditioning unit, you probably know that you have a lot of options. Unfortunately, all of these options can be quite overwhelming, and although you know that you want a system that will heat and cool your home effectively, you might be at a loss as to which system you should buy. If you are thinking about investing in a new unit, you might be trying to decide between a split system and an all-inclusive unit. Although both can be a good option, these are a few benefits of a split system that you should consider. Make Repairs Easier One thing that you should consider about a split system is that it can make repairs cheaper and easier. If your heater goes out, your HVAC professional can simply fix your furnace without touching your air conditioning at all, and vice versa. This is not necessarily the case with an all-inclusive unit, since it shares a lot of components. Also, if you ever need to replace your furnace or your air conditioning system, you can simply replace the part that is malfunctioning without having to replace the entire system, which can definitely help you save money. Avoid Taking Up Too Much Outdoor Space If you love your yard, you might not like the idea of having an enormous system outside, taking up a lot of space. By their very nature, however, all-inclusive units are a lot bigger and take up a lot more outdoor space. If you are limited on outdoor space or just don’t want a big unit getting in the way of your landscaping or enjoyment of your yard, a split system can be a better solution for you. Stay Inside If It’s Cold Since the furnace is typically the indoor component, you don’t have to go outside in the cold to perform maintenance on your unit like you do with an all-inclusive outdoor unit. Instead, you can change your filter, clean your furnace and otherwise take important maintenance steps from inside the house. This might not seem like a big deal, but if you find yourself performing outdoor maintenance on your unit in the middle of the cold winter, you might wish that your furnace was inside instead! Both options can be good, but these are some of the perks of a split system. For more information, talk to your HVAC professional about your options and the benefits of each. For an HVAC contractor, click on this link http://www.coeheatcool.com or do an online...

read more

Do You Really Need To Use A Heater?

Posted by on Jan 4, 2016 in Uncategorized | Comments Off on Do You Really Need To Use A Heater?

If you live in a region with rather mild winters — temperatures usually above freezing, but still maybe subject to the occasional frost advisory, for example — you might wonder if you can get through the winter without heating to save on bills. Or maybe your heater has broken, and you’re not too keen on spending the money to fix it just yet. However, there are health problems that can occur when you spend too much time in cold temperatures, even when those temperatures aren’t that low. Here are some of the health issues that you face unless you get your heater fixed and use it. Hypothermia Hypothermia does not necessarily require very low temperatures to take hold. The National Institute on Aging gives an example of a man developing hypothermia in a 55-degree apartment. That’s not usually considered that cold; chilly, yes, but not scarily so. Hypothermia is a drop in the body’s normal temperature and can lead to confusion, inability to move quickly, breathing and speech troubles, and possibly excess shivering, though shivering does not always occur. Chillblains Chillblains sound like something out of an old-fashioned fairy tale. But they are very real, and instead of dealing with snow queens or frost kings, you end up dealing with red, irritated skin with damaged blood vessels. Unfortunately, once you get chillblains on part of your body, they can come back during future exposure to cold weather. The CDC says chillblains can occur in temperatures as warm as 60 degrees Fahrenheit. Worsening of Asthma, Arthritis, and Dry Skin Some forms of asthma can be aggravated or triggered by cold temperatures, and arthritis pain and dry skin can become much worse. Combined with low humidity, too, these conditions can become downright painful, especially dry skin, which can crack and bleed. Heart Attacks If your body is exposed to temperatures that are colder than your body likes, it will have to work harder to keep your blood moving and your heart pumping. Your body has a more difficult time keeping your body temperature up, and this can contribute to an increased risk of having a heart attack. Fixing your heater and keeping it on during cold weather isn’t just a matter of modern convenience. You have to have the heat to stay healthy. If your heater is broken, if you need a new one, or if you just want tips on how to run the heat without causing your utility bills to soar, contact a heating installation or repair...

read more

Homeowners: HVAC Resolutions To Make For The New Year

Posted by on Jan 1, 2016 in Uncategorized | Comments Off on Homeowners: HVAC Resolutions To Make For The New Year

As a homeowner, you might not be paying as much attention to your heating and air conditioning system as you should be. Although you will obviously notice that there is a problem if your heat or air conditioning doesn’t turn on, you might not think that there is much to think or worry about as long as your system works. However, it is time to make a few changes in the new year. These are a few resolutions that you should consider making — and sticking to — in regards to your heating and air conditioning system. Change Your Air Filter More Often You’ve probably heard time and time again that you should be changing your HVAC filters more frequently. However, this is an easy thing to forget, and you might be skipping this critical maintenance step more than you would like to admit. Changing your filter as recommended by the manufacturer — usually every month or every three months — is very important if you want to keep your system running efficiently and if you want to prevent future repair issues. Plus, you are sure to notice a big difference in your home’s indoor air quality, particularly if you have pets or if you smoke in the house. Also, if you have made it your goal to keep a cleaner house this year, changing your filter regularly can help — it can actually cut down on the dust and dirt that is blown throughout your home. Have Your Unit Inspected and Maintained It is always a good idea to hire an HVAC professional to come out and inspect and maintain your unit once before the summer and once before the winter. This is a good time to make sure that your unit is prepared to keep your home and family comfortable during the hot and cold months and to ensure that it’s operating at its full capacity. Plus, if your unit is still under warranty, taking this step can help prevent any warranty issues. Consider Replacing Your Unit This Year Have you thought about replacing your HVAC unit? If your unit is old, isn’t energy efficient or is in need of extensive repair, it could be worth your while to replace it now. Many HVAC companies offer financing options that will help you pay for your purchase, and your potential energy savings can make it worthwhile in the long run. It’s a new year, so it’s time to make some positive changes. Make it your goal to follow these resolutions in the new year so that you can enjoy the best heating and cooling experience possible all year long. Contact a service like Always Ready Repair to learn...

read more